Power Amplifier 2.4GHz-4GHz 100W
Radio frequency parameters
test item | metric | unit | remarks | |
frequency range | 2500-4000 | MHz | ||
working voltage | 32 | V | 28-32 | |
maximumoutput | 100 | W | 100W@9.8A typical value | |
power amplifier efficiency | 32 | % | @100W | |
maximum gain | 45 | db | maximum power gain | |
gain flatness | ≤5 | db | ||
standard input power | 5 | dbm | ||
maximum undisturbed power | ≤10 | dbm | ||
Input port standing wave ratio | ≤2 | No power supply, network partition testing | ||
High and Low Temperature Testing | Work environment temperature (℃) | -10~+55℃ | ℃ | |
power stability | ±1.0@-40℃~+55℃ | dB | ||
Power Supply Requirements | ≥12A@+32Vdc; | Continuous wave output of 100W | ||
Power Supply Interface | Percutaneous capacitor | |||
control communication interface | 485 Communication Protocol TTL communication | Supports temperature, current, voltage detection, and RF output power measurement 2.54mm 2*4 seat sub TTL communication can interface with digital source communication, allowing configuration of digital source frequency bands and output power levels. | ||
Radio Frequency Output Connector | Input SMB-JE, output N mother , | |||
size | 170*77*24.5 | mm | ||
weight | 750 | g | ||
mounting hole | 152.3*71.5 | mm | M3.0*4 | |
Contact: James
Phone: Collaboration13554914993
Tel: Product Inquiry17665344694
Email: market@jiffy2016.com
Add: Building 11, Dadu Industrial Zone, Bao'an District, Shenzhen