PA-137150G-100W

13.75-15GHz 100W Power Amplifier

Product Description:

1. Technical Specifications

1) Operating Frequency: 13.75GHz ~ 15GHz

2) Typical Power Gain: 57dB

3) Output Power: ≥50dBm

4) Power Flatness: ≤±2dB

5) Signal Mode: CW, pulse signal and various types of RF modulation sources

6) Operating Voltage: +28V

7) Spurious: ＜-65dBc

8) Input VSWR: ≤1.5

9) Power Consumption: ＜500W @ 100W CW RF signal output

10) Weight: ＜2kg

11) Operating Temperature: -40~+55°C

2. Product Functions

1) Support the function of controlling the power amplifier switch;

2) Support over-temperature protection function and RF output open-circuit protection function.

3. Interface Definition

The module interface definitions are shown in Table 1 and Table 2.

Table 1 Interface Definition

No.	Name	Connector Model	Description
1	POW&CON	J30J-21ZKW-J	Power and control interface, detailed definition see Table 2
2	RFIN	SMA-50KFD（female）	RF signal input
3	RFOUT	WR62	RF signal output

Table 2 Power and Control Interface Definition

No.	Pin Name	Function	Remarks
1	+28V	Positive power supply	Power supply input
2	+28V	Positive power supply
3	+28V	Positive power supply
4	+28V	Positive power supply
5	+28V	Positive power supply
6	+28V	Positive power supply
7	+28V	Positive power supply
8	+28V	Positive power supply
9	GND	Power ground	Connected to Mechanical shell
10	GND	Power ground
11	GND	Power ground
12	GND	Power ground
13	GND	Power ground
14	GND	Power ground
15	GND	Power ground
16	GND	Power ground
17	PTT	Enable	When the TTL signal is high, the power amplifier is turned on
18	TEMP	Temperature alarm	Low level for normal, high level for alarm
19	RS485+	TX	Serial communication
20	VTEMP	Temperature reporting	Vout=(10mV/℃*Temp℃)+500mV
21	RS485-	RX	Serial communication