PA-137150G-200W

13.75-15GHz 200W Power Amplifier

Product Description:

1. Technical Specifications

1) Operating Frequency: 13.75GHz ~ 15GHz

2) Typical Power Gain (dB): 57

3) Output Power: ≥53dBm

4) Power Flatness: ≤±2dB

5) Signal Mode: CW, pulse signal and various types of RF modulation sources

6) Operating Voltage: +28V

7) Input VSWR: ≤1.5

8) Spurious: ＜-65dBc

9) Power Consumption: ＜900W @ 200W CW RF signal output

10) Weight: ＜4kg

11) Operating Temperature: -40~+55°C

2. Product Functions

1) Support the function of controlling the power amplifier switch;

2) Support over-temperature protection function and RF output open-circuit protection function.

3. Interface Description

The module interface definitions are shown in Table 1, Table 2 and Table 3.

Table 1 Module Interface Definition

No.	Name	Connector Model	Description
1	POWER	J30J08P080S000S0P00	Power interface, pin definition see Table 2 for details
2	CONTROL	J30J-9ZKP	Control interface, pin definition see Table 3 for details
3	RFIN	SMA-50KFD（female）	RF signal input
4	RFOUT	WR75	RF signal output

Table 2 Power Interface Pin Definition

No.	Pin Name	Function	Remarks
1	+28V	Positive Power Supply	Power supply input
2	+28V	Positive Power Supply	Power supply input
3	+28V	Positive Power Supply	Power supply input
4	+28V	Positive Power Supply	Power supply input
5	GND	Power ground	Connected to Mechanical shell
6	GND	Power ground
7	GND	Power ground
8	GND	Power ground

Table 3 Control Interface Pin Definition

No.	Pin Name	Function	Remarks
1	PTT	Enable	When the TTL signal is high, the power amplifier is turned on
2	TEMP	Temperature Alarm	Low level for normal, high level for alarm
3	RS485+	TX	Serial communication
4	VTEMP	Temperature Reporting	Vout=(10mV/℃*Temp℃) +500mV
5	RS485-	RX	Serial communication
6	SWCLK	/	Program download port
7	SWDIO	/
8	+3.3V	/
9	GND	/